A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5910-00-868-3005
NSN 6110-00-618-4171
NSN 6610-00-652-8543
NSN 6135-01-195-5343
NSN 5925-01-393-0711
NSN 6650-01-450-0790
NSN 5905-01-172-7736
NSN 6130-00-643-4894
NSN 5920-01-601-5539
NSN 5945-00-536-3985
NSN 6135-01-417-6539
NSN 5999-01-318-5715