A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6645-01-022-2632
NSN 6650-01-380-1394
NSN 6145-01-657-2283
NSN 5998-00-118-9768
NSN 6645-01-007-5295
NSN 4140-01-209-8456
NSN 5920-01-044-5621
NSN 6320-01-015-9856
NSN 6110-01-379-3984
NSN 6620-01-444-4048
NSN 5998-00-218-0587
NSN 5835-01-242-9806