A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5835-01-093-3211
NSN 5905-01-198-9417
NSN 6220-00-369-5422
NSN 5905-00-946-2087
NSN 5960-00-253-1473
NSN 6685-01-358-7480
NSN 5998-01-362-2420
NSN 5905-00-446-5777
NSN 5895-00-132-0233
NSN 5835-01-593-7579
NSN 5925-01-465-5536
NSN 5960-00-034-7925