A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5990-01-633-9503
NSN 5915-01-439-5291
NSN 6220-01-100-7428
NSN 6220-01-202-7954
NSN 4140-01-587-1345
NSN 6240-01-179-1061
NSN 5965-01-222-1420
NSN 6130-01-417-2885
NSN 5985-00-458-8389
NSN 6130-01-044-5059
NSN 5996-01-645-9422
NSN 6130-00-170-4844