A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5985-01-090-8717
NSN 5905-00-788-3130
NSN 5975-00-299-1202
NSN 6620-00-816-9755
NSN 2925-01-599-1901
NSN 6620-01-058-6308
NSN 5925-01-210-1678
NSN 5985-00-776-5005
NSN 5935-01-196-5673
NSN 6150-01-169-9571
NSN 5925-01-447-6758
NSN 5985-01-633-5071