A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5895-01-190-7042
NSN 5950-01-157-6619
NSN 5930-01-596-4036
NSN 6620-01-322-0018
NSN 5935-01-167-0095
NSN 5925-01-266-1093
NSN 6105-00-702-1333
NSN 5999-01-413-6963
NSN 6135-01-122-4448
NSN 5999-00-358-1933
NSN 4140-01-197-4273
NSN 5935-01-525-7983