A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5999-01-381-1139
NSN 5920-01-578-7055
NSN 6105-01-069-4253
NSN 5950-01-091-4463
NSN 6135-01-096-1452
NSN 5930-01-594-9313
NSN 6320-01-476-7702
NSN 6685-00-169-1663
NSN 5915-00-948-6927
NSN 5895-00-969-6690
NSN 6150-01-427-3764
NSN 6240-00-677-0305