A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5905-01-356-8566
NSN 5975-01-127-3343
NSN 5895-00-874-6609
NSN 5996-00-477-5921
NSN 6220-00-007-5973
NSN 6130-01-309-6739
NSN 6650-01-445-7250
NSN 5910-01-409-1156
NSN 6610-00-342-9825
NSN 5945-01-432-2829
NSN 5910-01-302-8731
NSN 6645-00-942-7170