A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6150-00-596-9882
NSN 6610-00-987-9716
NSN 6150-00-452-1086
NSN 6150-01-411-4744
NSN 5920-01-606-2904
NSN 5935-00-928-1790
NSN 5930-00-420-7650
NSN 5996-01-476-7550
NSN 5915-01-431-4256
NSN 5960-01-489-1510
NSN 5950-01-227-4655
NSN 6240-00-383-7668