Second end has a hole 0.281 in. Diameter and a groove 0.735 in. Dia, 0.125 in. Wide
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes shaft(1), straight; and axle(1), straight.
Classification: Transmission shafts and cranks, except camshafts and crankshafts
NSN 6130-01-366-4310
NSN 6130-01-361-8628
NSN 5998-00-480-6928
NSN 5998-01-062-0394
NSN 6150-01-625-2053
NSN 2925-01-250-2731
NSN 6145-00-155-5297
NSN 6320-01-096-6649
NSN 5990-01-529-4679
NSN 6645-01-154-3080
NSN 6685-00-596-8765
NSN 5930-01-283-6175