A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6240-01-571-7706
NSN 5935-01-415-2885
NSN 5950-01-483-1472
NSN 5920-01-430-4081
NSN 5835-01-284-5689
NSN 6105-00-050-4373
NSN 6220-01-314-2439
NSN 6620-01-428-7072
NSN 6685-01-304-4374
NSN 4140-01-591-7699
NSN 5920-00-584-4592
NSN 5999-01-529-6135