A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 7035-01-131-1168
NSN 6610-00-104-8223
NSN 4140-01-592-3151
NSN 5960-01-573-6483
NSN 5965-00-170-5254
NSN 5985-01-215-1196
NSN 6610-01-542-2276
NSN 6220-00-262-7863
NSN 7035-01-014-3808
NSN 5985-00-997-2503
NSN 5985-01-394-6861
NSN 5950-00-156-7287