A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6320-01-539-4789
NSN 5950-01-634-0677
NSN 6610-01-314-7964
NSN 4140-01-526-1066
NSN 6130-01-525-5912
NSN 6145-01-634-0388
NSN 5895-01-352-8774
NSN 6110-00-052-2655
NSN 5996-01-109-1586
NSN 5996-01-570-4583
NSN 5985-00-531-5821
NSN 6620-00-959-6614