A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5950-00-704-3735
NSN 5855-00-256-5562
NSN 5920-01-116-3576
NSN 5895-01-278-8243
NSN 6150-01-515-3126
NSN 5985-01-025-1491
NSN 6240-01-361-8344
NSN 6645-01-215-0617
NSN 7035-01-397-5009
NSN 6135-00-100-0485
NSN 2925-01-067-4446
NSN 4140-01-486-8953