A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5985-00-529-0093
NSN 6220-00-200-7888
NSN 6110-01-273-7856
NSN 5855-00-973-5717
NSN 5925-00-058-3004
NSN 6110-00-493-4774
NSN 6645-01-537-3114
NSN 5920-01-173-9925
NSN 6130-01-472-2483
NSN 6610-01-443-5291
NSN 6620-01-250-1692
NSN 4140-00-825-7506