A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5910-01-247-9892
NSN 7035-01-649-8977
NSN 5930-00-884-8258
NSN 6610-01-303-9516
NSN 5835-00-170-5238
NSN 6130-01-250-5144
NSN 5985-01-367-2220
NSN 5990-01-264-9759
NSN 5990-01-288-7393
NSN 5985-00-230-5289
NSN 4140-01-528-6681
NSN 6610-00-179-9035