A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6240-01-562-4891
NSN 6685-01-445-6983
NSN 5935-01-555-8731
NSN 6110-00-187-1018
NSN 7035-01-042-5308
NSN 5935-01-252-3008
NSN 5950-01-169-9867
NSN 6645-01-477-5316
NSN 5950-00-156-7287
NSN 5920-00-880-2433
NSN 5855-00-560-0110
NSN 5945-00-435-9520