A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5975-01-146-5663
NSN 5855-00-962-5792
NSN 6135-00-110-1981
NSN 6110-00-864-5360
NSN 5960-00-715-9227
NSN 5985-01-021-4687
NSN 5895-01-644-6979
NSN 5985-01-560-1439
NSN 5915-01-323-5279
NSN 5835-01-250-2939
NSN 6150-01-190-0624
NSN 6620-00-757-1950