A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6650-01-564-0665
NSN 5999-01-027-3748
NSN 6220-01-172-5300
NSN 5915-00-472-9704
NSN 6240-01-294-8226
NSN 5945-00-322-2114
NSN 6220-00-056-6751
NSN 5996-01-567-6285
NSN 5985-01-440-9350
NSN 5925-01-442-5795
NSN 5985-01-627-8307
NSN 6220-01-549-8454