A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5998-01-278-8248
NSN 4140-00-463-6166
NSN 5975-00-908-1556
NSN 5960-01-632-6576
NSN 6105-01-106-1825
NSN 6145-00-779-2384
NSN 5975-01-474-4400
NSN 5950-00-620-4395
NSN 6240-01-470-1111
NSN 5975-01-509-7668
NSN 5925-01-239-6743
NSN 5999-01-007-8208