A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5985-00-373-7054
NSN 4140-01-376-3104
NSN 5950-01-305-5602
NSN 5925-01-145-5330
NSN 5965-01-433-1974
NSN 5975-01-384-0695
NSN 5930-01-128-3874
NSN 5855-00-631-4565
NSN 5835-01-501-0526
NSN 5990-01-481-0164
NSN 6105-01-609-1144
NSN 5905-01-142-2116