A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6645-00-099-6913
NSN 5915-01-100-4105
NSN 5960-00-111-8456
NSN 5990-01-522-6096
NSN 7035-01-143-0355
NSN 6220-01-624-7419
NSN 6685-01-123-3248
NSN 5985-00-575-4416
NSN 5985-01-065-1675
NSN 6110-01-031-5867
NSN 5985-00-973-0200
NSN 5990-01-309-0048