A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5935-00-201-3545
NSN 5985-01-541-0018
NSN 6645-01-088-5244
NSN 6610-01-505-3495
NSN 5895-01-047-3301
NSN 5855-01-437-6161
NSN 5985-00-422-3315
NSN 5910-01-094-6168
NSN 5935-01-507-9480
NSN 7035-01-227-2546
NSN 6105-00-104-5306
NSN 6645-00-353-6659