A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6620-01-231-9731
NSN 5996-00-292-5394
NSN 5920-01-452-0916
NSN 6685-01-421-9939
NSN 6240-01-369-6464
NSN 6650-00-539-7298
NSN 5996-00-518-4880
NSN 5935-01-033-8703
NSN 5960-00-364-3647
NSN 2925-01-445-4095
NSN 6110-00-959-7002
NSN 6645-00-526-9476