A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 7035-00-445-9657
NSN 5905-00-850-6238
NSN 5895-01-435-4386
NSN 5998-01-217-3973
NSN 2925-01-597-9541
NSN 5999-01-151-6832
NSN 5990-01-443-2931
NSN 6610-01-500-0863
NSN 5895-00-185-0891
NSN 4140-00-878-0436
NSN 6610-00-464-6924
NSN 5910-01-200-7944