A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6650-01-627-9203
NSN 6110-01-461-5491
NSN 5985-01-256-6961
NSN 6240-01-260-3597
NSN 7035-01-537-0408
NSN 5910-01-270-9988
NSN 5915-01-295-0949
NSN 5950-00-255-0157
NSN 5999-01-381-6548
NSN 5965-00-677-1461
NSN 5998-01-111-2723
NSN 7035-00-870-0290