A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6320-01-106-4414
NSN 5935-00-506-6540
NSN 5915-01-546-9193
NSN 5999-00-247-1352
NSN 4140-00-903-5799
NSN 6620-00-366-1365
NSN 5925-01-012-0764
NSN 5920-01-421-5362
NSN 5835-01-512-4834
NSN 5960-01-414-8918
NSN 5925-01-522-3360
NSN 6610-00-200-8832