A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6130-01-337-5177
NSN 6650-00-466-1697
NSN 6135-00-998-5884
NSN 5965-00-554-4138
NSN 5990-01-411-5930
NSN 6685-01-141-3796
NSN 6320-00-116-3658
NSN 5945-00-009-3789
NSN 5895-01-211-6241
NSN 6130-01-180-9658
NSN 6110-01-270-9042
NSN 6105-00-635-9809