A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 7035-01-302-5359
NSN 5999-01-614-9862
NSN 5999-00-897-2293
NSN 6145-00-192-7215
NSN 5835-01-281-7281
NSN 5950-01-058-5575
NSN 5915-00-633-1217
NSN 5925-01-136-2231
NSN 5960-01-018-8596
NSN 5930-01-448-9435
NSN 5999-00-806-1519
NSN 5998-00-995-7702